Precision measuring Salt Spray Testing Chamber Salt Spray Measuring Testing 110V 239366
Precision measuring Salt Spray Testing Chamber Salt Spray Measuring Testing 110V 239366: Home Improvement,Buy Precision measuring Salt Spray Testing Chamber Salt Spray Measuring Testing 110V 239366: Safety Training Kits - ✓ FREE DELIVERY possible on eligible purchases,The machine have timing function,and you could set time to open or close automatically,The level area of the spray taking device is 80 cm2,the diameter is about 10 cm,Put the spray taking device beside the test piece,Spray liquid should be collected at least 16 hours,an average per hour can be collected 2ml to 1ml solution,Use the final average to represent the amount of spray,The concentration of the Sodium Chloride Solution should be maintained at 40~60g/L,The temperature of the pressure barrel should be kept in 47+1 degree,temperature of the brine barrel should be kept in 35+1 degree,Features:,All equipment needed in the test: Spray nozzle,salt water barrel,test piece support,spray liquid collection container,test chamber,salt water,supply tank,pressure tank,supply equipment and exhaust equipment required for compressed air,the device is shown in Fig,and test as followed,Blunt material is required,it is required that the material itself cannot be corroded,and it can not affect the corrosion test,The fog nozzle cannot spray the test liquid directly to the sample, the solution at the top of the spraying chamber cannot drop on the test piece,The test liquid dropped from test piece cannot flow back to the salt bucket again for the test,The solution should not contain grease and dust,so you have to prepare an air cleaner,The level area of the spray taking device is 0 cm,the diameter is about 0 cm,Put the spray taking device beside the test piece,Scope of application:,This product is used to test the corrosion resistance of the electrodeposited coating of many kinds of metallic materials,Use the salt spray test machine to spray the Sodium Chloride Solution to the surface of electric coating to achieve the purpose of detection, Best to calibrate the concentration once a day, Test the PH value during experience after collection,Continuously,cannot interrupt,Collect once per hour,at least 6 hours,mean the average value,Test at least twice a day,interval seven hours every time,Other humidity required by the seller and the buyer agreement,Continuous time from the beginning to the end,Item included,39366,*Salt spray testing chamber 0V
Precision measuring Salt Spray Testing Chamber Salt Spray Measuring Testing 110V 239366
- 3/8 x 12 Carriage Bolts with Nuts & Washers 12 per Pack
- Inch 105.87 lbs/in Spring Rate 0.24 OD 9.21 lbs Load Capacity 302 Stainless Steel Pack of 10 Compression Spring 0.038 Wire Size 0.31 Free Length 0.223 Compressed Length
- 10.5 GPM General Pump DCLTG12 Telescoping Wand 4000 PSI 6-12
- Bel-Art Polypropylene Spill Containment Tray with Grid; 14³/₈ x 12⅛ x 4¾ in. F24676-0003
- Aluminum 2 Female Camlock Hose Fitting x 2 Female NPT USA
- 80/20 Inc 40 Series 40mm x 80mm T-Slot x 2440mm 40-4080-Black
