Vermont Gage Steel No-Go Plug Gage 0.583 Gage Diameter Tolerance Class ZZ
Vermont Gage Steel No-Go Plug Gage,Tolerance Class ZZ,583' Gage Diameter: Hardware Pin Gauges: Industrial & Scientific,Vermont Gage Steel No-Go Plug Gage,Tolerance Class ZZ,583" Gage Diameter: Hardware Pin Gauges: Industrial & Scientific,Supplied with a certificate of accuracy traceable to National Institute of Standards and Technology,NIST,No-go,-,gage for measuring the upper limit of a hole,Available in a range of sizes from,0040” to 1,0005”,Made from tool steel 60/64 Rockwell c scale,Rc,cold stabilized for durability,Class ZZ,tolerance of,0002”,for longer wear,The steel no-go,-,plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts,A certificate of accuracy traceable to NIST is available for each gage,and each pin is marked with its size and direction of tolerance in sizes over,00”,Each gage is sealed in a volatile corrosion inhibitor,VCI,bag and packaged with a rust preventative,All gages measure 2” long,are within,0000” round,per ASME B89,and have at least a 0-microinch finish for a smooth finish,This gage is made of tool steel 0/2 Rc,cold stabilized,for durability and is available with either a steel or black guard finish,to inhibit corrosion and for indicating wear,Sizes are available from,000” to,000”,increments of,00”,with a tolerance of -,0002” for longer wear,Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes,They are available in different classes,based on acceptable tolerance,allowed deviation from the stated size,Standard tolerances and classes for cylindrical gages up to,82” are as follows: Class XX,00002" or,000 mm,Class X,0000" or,000 mm,Class Y,00007" or,008 mm,Class Z,000" or,002mm,and Class ZZ,0002" or,000 mm,For gages with a wider diameter,tolerance gradually increases for each class,Since 98,Vermont Precision Tools,Inc,VPT,has been manufacturing a variety of precision round and ground pins,perforators,and special punches,was formed in 980,and manufactures a wide range of fixed limit gages,Located in Swanton,Vermont and Franklin,Kentucky,manufactures 98% of the products they sell and is ISO 900:2000 and ISO 702 quality certified
Vermont Gage Steel No-Go Plug Gage 0.583 Gage Diameter Tolerance Class ZZ
- Color : Black Phone Replacement Parts LCD Screen and Digitizer Full Assembly for HTC U12 Life New Accessories
- uxcell M5x15mmx1.2mm 316 Stainless Steel Flat Washers Gasket Fastener 40pcs
- Smith FE6001F 1/3-1/5 HP 825 RPM 48Y Frame 208/230 volts A.O 1.9 Amps Ball Bearing Condenser Motor
- DWDTSMM42.00 Qualtech 42.00mm HSS 5MT Metric Taper Shank Drill Bit
- 5/16 Bright Uncoated Finish Size Built-In Pilot On Size Alvord Polk 500 High-Speed Steel Counterbore
- Performance Tool W54257 Short 90 Degree Grease Fitting Pack of 50
- 24 x 1 Partners Brand PNP2490 Newsprint Roll White 440 30#
